ODH2-3

Commercial / Residential grade GU10 base 3″ Line Voltage Recessed Housing


Description:
  • Wire through junction box
  • Adjustable hangar bar from 14"-24"
  • Thermally protected with shut off sensor
  • New construction & rated for damp locations
  • Includes cover to protect exposed cone from paint
  • Minimum 3" space between housing and insulation
Lamp Type GU10 base 50W Max.
Input Voltage 120V AC
Output Voltage 120V AC
Mounting Four-sided
Application Commercial / Residenetial
Included Detachable socket
Push-in connectors
Cover to protect exposed cone from paint

Hanger Bars

  1. Install hanger bars to fixture.
    Be sure that end tab is facing outward


Installing Fixture to Ceiling

  1. Joists type ceilings — Extend hanger bars to fit between joist.
    Position fixture temporarily by hammering nail on bars into the joists.
    Hangers should be leveled with bottom of joists
  2. Suspended (T-bar) ceilings — Extend hanger bars.
    1*past T-bars then rest fixture on T-bars.
    Secure fixture to T-bars with wire


Install Trim Assemblies

  1. Insert trim into housing — Push upward fully.
    Pressure springs with hold trim in place


Electrical Connection

  1. Most dwellings built before 1985 have supply wire rated +60°C
    Consult a qualified electrician before installing
  2. Junction box contains three wires:
    Black (live +), white (neutral -) and bare ground.
    Make sure to connect WHITE to WHITE and coloured or BLACK to BLACK
  3. After completing the wiring (being sure the wires are placed within wiring box), snap wiring box cover closed


Grounding

  • For Romex or 3 wire BX:
    flexible Armour cable installations attach supply ground load to bare copper ground lead
    or ground screw in wiring box mount or mounted on plaster frame

Proud Partners