menu search close
  1. Home
  2. LED
  3. COMMERCIAL LIGHTING
  4. Exit Signs
  5. OE-G026

OE-G026

LED Edge Lit Running Man Exit Sign in 2W 120-347V AC for universal mounting

Description:
  • Includes Test button and charge indicator light
  • Has UL-94V-0 flame rating and is fire-retardant
  • Provides Overcharge & over-discharge protection
Wattage Super Bright LED 2W
Voltage 120-347V AC /60Hz
Material Injection molded thermoplastic ABS housing
Battery 3.6V 300mAh Nickel Cadmium Battery
Emergency Duration Time ≥ 90 min
Conversion Time < 0.2 seconds
Grade of Protection IP 20
Insulation II, Range: 80m²
Operating Temperature 0°C ~ +40°C
Warranty 5 years

Electrical Connections

  1. Make the proper AC wire connections
  2. If using 120V AC, connect the BLACK and WHITE wires to the building utility
  3. If using 347V AC, connect the RED and WHITE wires to the building utility
  4. Cap off unused wires in all cases, use standard wires nuts to connect to wires


Ceiling and Wall Mounting

  1. Place correct PVC onto the panel.
    Fix it on the panel with buttons supplied
  2. Pull out all AC wires from top of fixture for wall and ceiling mounting
  3. Put the hole plug (in the packing bag) to the side of fixture
  4. Insert EXIT panel into main body assembly gently
  5. Feed AC supply wires through canopy center hole
  6. Assemble canopy onto main body assembly with Tapping Screws (supplied).
    Make proper wire connections
  7. Use PM4-40 screws to tighten canopy to crossbar
  8. The unit can be installed on any surface.
    You may rotate the EXIT panel in any angle from 0° to 180°,
    ceiling mounting rotate 90° become wall mounting


Surface End Mounting

  1. Pull out all AC wires from side of the fixture for surface end mounting
  2. Refer to step 1 and step 4~7 in surface CEILING & WALL MOUNTING for surface end mounting

Proud Partners