PUK SS SN

2.2W 12V DC Super Slim LED Puk Light for mounting under kitchen cabinet

Compatible Drivers (sold separately):

Wattage	2.2W
Voltage	12V DC
Lumens	150 lmn
Lifetime	50000 hours
CRI	80
Beam Angle	120º
Dimmable	Yes
Rating	Non-IC Rated / Indoor use / for Damp locations
Grade of Protection	IP 42
Application	Under cabinet / Home / Office / Kitchen / Workshop
Colour Temperature	3000K (Warm White) / 5000K (Cool White)
Operating Temperature	-20ºC ~ +40ºC
Warranty	5 years

Open packaging and place all components onto a clean surface
Turn power OFF from the electrical panel before starting installation
For Recessed Mounting, Remove the trim ring from the puk light.
Remove the LED light completely from surface mounting ring.
With a screw driver (supplied by others) detach the torsion clips from the LED puk light.
In your desired area, drill a 2-1/4" hole, using a cut hole saw (supplied by others).
Run the wires through the cut hole, and then secure the LED puk light to medium with screws provided.
Connect the trim ring back to the LED puk light magnetic tabs
For Hard Wire, use wire type and gauge suitable for application to connect the fixtures, and twist-on wire connectors (supplied by others).
Ensure that correct polarity is followed through the line
For Plug-in, make a daisy chain connection with male to female DC 2.1 connection.
Attach DC 2.1 connector to a power feed from the 12V constant voltage driver
Rest driver to the desired secured location
Once assembly is complete, turn on power to confirm fixture is working properly

Proud Partners