1102-7WH

7" 15W residential grade ultra thin LED Flush Mount that snaps into place


Available Finishes:
  • White

Description:

  • Residential grade LED Flush Mounts that snap into place and flush with the ceiling for easy installation
  • Contains AC driver with sleek dimming capacity which makes the installation process simpler
  • They are ultra-thin which makes these LED Flush Mounts versatile as they can fit more applications, even limited plenum space
  • Provides clear smooth uniform light with no visible fasteners or dark spots

Wattage

15W

Voltage

120V

Lumens

970 lmn

Beam Angle

120

Lifetime

30000 hours

CRI

80

Rating

Non-IC Rated / Indoor use only / for Damp location

Grade of Protection

IP 20

Applications

Corridors / Lobbies / Kitchens / Balconies / Bathrooms / Bedrooms, etc.

Colour Temperature

3000K (Warm White) / 5000K (Cool White)

Operating Temperature

-20°C ~ +40°C

Dimmable

Yes

 

Surface Mount Without Junction Box

  1. Turn OFF the switch.
    Cut a suitable hole in the ceiling (60mm across)
  2. Fix the bracket to the ceiling with the screws provided
  3. Connect lamp and bracket with steel safety wirerope to prevent lamp dropping.
    Use terminal caps to connect lamp input line with power supply
  4. Rotate the lamp into the bracket in the indicated direction
  5. Turn ON the switch, if the lamp lights up without any issue, installation is complete
     

Surfacfe Mount With Junction Box

  1. Turn OFF the switch.
    Screw the bracket to the junction box ceiling
  2. Connect lamp and bracket with steel safety wirerope to prevent lamp dropping.
    Use terminal caps to connect lamp input line with power supply
  3. Rotate the lamp into the bracket in the indicated direction
  4. Turn ON the switch, if the lamp lights up without any issue, installation is complete


Installation In Can

  1. Attach the enclosed clips to the bracket.
    Then attach the bracket to the body of the light
  2. Attach E26 adapter to the power supply on the fixture
  3. Screw E26 adapter into the can as you would with a regular bulb
  4. Squeeze the clips on the fixture and push the fixture into the can until the fixture is flush
  5. Turn ON the switch, if the lamp lights up without any issue, installation is complete
Related Products
Proud Partners