Surface Mount Without Junction Box

1. Turn OFF the switch.
   Cut a suitable hole in the ceiling (60mm across)
2. Fix the bracket to the ceiling with the screws provided
3. Connect lamp and bracket with steel safety wirerope to prevent lamp dropping.
   Use terminal caps to connect lamp input line with power supply
4. Rotate the lamp into the bracket in the indicated direction
5. Turn ON the switch, if the lamp lights up without any issue, installation is complete
    

Surfacfe Mount With Junction Box

1. Turn OFF the switch.
   Screw the bracket to the junction box ceiling
2. Connect lamp and bracket with steel safety wirerope to prevent lamp dropping.
   Use terminal caps to connect lamp input line with power supply
3. Rotate the lamp into the bracket in the indicated direction
4. Turn ON the switch, if the lamp lights up without any issue, installation is complete

Installation In Can

1. Attach the enclosed clips to the bracket.
   Then attach the bracket to the body of the light
2. Attach E26 adapter to the power supply on the fixture
3. Screw E26 adapter into the can as you would with a regular bulb
4. Squeeze the clips on the fixture and push the fixture into the can until the fixture is flush
5. Turn ON the switch, if the lamp lights up without any issue, installation is complete