8800-CL

Black specialty plate with clear cover, gasket, mounting hardware

Material	Weatherproof cover & base Decora style receptacle plate Gasket with slits for mounting screws Baggie assembly with mounting hardware
Application	For single gang
Qualification	Meets extra duty requirements for any application

DISCONNECT POWER to the receptacle, at the circuit breaker panel before installing
If installing on an existing receptacle, remove and discard the existing cover, plate and gasket
Position the gasket as required after removing the appropriate perforated sections.
It can be temporarily held onto the back of the base using the mounting hardware provided
Mount the base assembly on the receptacle to the junction box using two of long screws provided.
To ensure weatherproof protection, the hinges must be located at the top.
If mounting to an outdoor junction box or FS box, use the remaining long screws.
Doing so will further secure the base assembly to the junction box, using the existing holes.
For specially designed junction boxes, mounting holes should be drilled to line up with the hole in the box
Make sure all screws are secure but not over-tightened.
Install the remaining short screws into the receptacles as required
To open, bend back the plastic latch while lifting the cover.
A hasp is provided for padlocking

Proud Partners