DISC4FL-GM-WH

Commercial / Residential grade 4" LED Slim Gimbal Downlight in 9W


Available Finishes:
  • White

Description:
  • Depth is 1-3/8"
  • 90° tilt and 360° rotation
  • Optical lens with 38° beam spread
  • Perfect for directional accent lighting
  • DISC4FL-GM-WH + OT-SLIM4 (Driver)


 

Accessories (sold separately):

PLATE4-HB PLATE26-4 DMD-ELV OT-SLIM4
Mounting plate for ORTECH 4" slim lights New construction plate for ORTECH 4" slim lights Single-pole 3 way dimmer LED driver for ORTECH 4" slim lights

 

Wattage 9W
Voltage 120V
Lumens 700 lmn at 3000K
740 lmn at 5000K
Beam Angle 38°
Lifetime 50000 hours
Cutout ⌀ 4-1/4" (108 mm)
CRI 80
Dimmable Yes
Rating IC Rated / Indoor use / for Damp location
Grade of Protection IP 44
Air Tight Yes
Application Recessed ceiling / Balcony / Overhanging eaves, etc.
Colour Temperature 3000K (Warm White) / 5000K (Cool White)
Operating Temperature -20°C ~ +40°C
Warranty 5 years

Fixture Installation

  1. Cut a hole for the lamp. The plate is mounted on the board
  2. Open the cover of the junction box.
    Push and remove one of half inch. Knockouts on the side plate.
    Tighten the connector by hand.
    DO NOT attach the junction box to anything so you can pull it through.
    The ceiling opening in case you need to service the driver in the future.
    Install standard 16 cable connector.
    Use double connector for daisy chaning multiple drivers.
    Insert line voltage feed into the cable connector.
    Splice same colour wires using quick connector. Close the cover
  3. The spring loaded into the ceiling, and adjust smooth


Options for Locating Driver

  1. Locate next to the fixture-run line voltage wiring to first junction box
    and daisy chain to the junction boxes of the fixtures
  2. OR install all drivers in one location and use low voltage extension cables to the fixture.
    Use only extensions provided by the manufacturer

Proud Partners