60 inch Wall Mounted and Wall Recessed Electric Fireplace


  • Two levels heating function, Low - 750W and High - 1465W
  • Multiple 10 color high power LED for both flame and ember bed
  • Timer settings: 0.5-8 hours
  • Flame brightness adjust with 5 levels
  • Flame speed with 3 levels adjust
  • Operate with remote control, Touch on control panel
  • New HD Pro Flame Technology
  • Media option: Decorative crystals, Log set
  • Heating escape from front
  • Equipped with over heat protection safety device
  • High end quality tempered glass
  • Installation hardware kits included

Wattage LOW - 750W and HIGH - 1465W (2 levels of heating)
Voltage 120V AC, 60Hz
Timer Setting 0.5-8 hours
Heat Area Upto 400 sq.ft.
Glass Panel Colour Black
Heat Location Front
Flame Colours 10 colour options
Flame Speed Setting 3 levels
Media Decoration Crystals (clear and black), Realistic log-set
Touch Panel Control Yes
Remote Control Yes
Flame Brightness 5 levels
Wall Bracket Yes

Recessed to Wall Installation

  1. Select a dry wall to open a hole for fireplace box
  2. Fix the three anchors in each side of the fireplace box
  3. Take off the two screws in both sides of the glass panel
  4. Have two people to take the glass panel out of the fireplace box.
    Place it at a soft and clean place
  5. Have two people to move the fireplace box to the wall hole



Wall Mounted Installation

  1. Select a location that is not prone to moisture and is located at least 36" away from combustible materials
  2. Have two people hold the appliance against the wall to determine the final location
  3. Place unit face down on a soft, non-abrasive suface.
    Remove ethe bracket from the back of the unit by removing the screws
  4. Mark out location, then mount the bracket(s) onto the wall using the supplied screws.
    This bracket MUST have the hooks facing upward and be level
  5. Witht the wall mounting bracket installed, have two people lift the appliance up.
    Insert the two hooks on the bracket into the two slots on the back of the appliance
  6. Check the appliance for stability ensuring that the bracket will not pull free from the wall

Proud Partners