OD-PC

LED Landscape Lighting Photocell for transformer


Description:
  • Time delay 30-120 seconds
  • Screw thread and zinc alloy nut
  • Additional swivel available for further adjustments
  • Consistent performance regardless of the ambient temperature
  • Controls street, passage and doorway lighting at an ambient lighting level
Rated Loading 1800W 1100VA
Rated Voltage 120V AC /50-60Hz
Power Consumption 1.5VA
ON/OFF Levels 10-20Lx On (Dusk)
30-60Lx Off (Dawn)
Ambient Temperature -40°C ~ +70°C
Relative Humidity 95%
Body Dimensions Body — 88 mm (length) x  32 mm (diameter)
Stem — 27 mm (extension)
180°
Swivel Dimensions 85 mm (length) x 36 mm (diameter max.)
200°
Warranty 5 years

Installation & Operational Instructions

  1. Disconnect power
  2. Place screw thread of the SWITCH in knockout hole and fasten with rubber gasket and Zinc alloy lock-nut
  3. DO NOT install the switch with the Photocell facing artificial or reflected light.
    This will cause the unit to cycle on and off at night
  4. It is normal for the SWITCH to take several minutes to turn off when first installed.
    To test "turn on" during daytime, cover its eye with black tape or other opaque material.
    DO NOT cover with finger because light traveling through fingers may be great enough to keep the switch open
  5. Test will take approximately 2 minutes

Proud Partners