1. Home
  2. LED
  3. Panel lights
  4. OD347-2X2D

OD347-2X2D

Commercial grade 120-347V square LED Back Lit Panel


Description:

  • Commercial grade LED Back Lit Panels with great heat dissipation and low light degradation qualities
  • Mainly used in commercial lighting places such as office, factory, supermarket, etc.
  • Dustproof — zero distance between back cover and the frame protects the Back Lit Panel from dust completely
  • Utilizes high quality driver with efficiency > 86%, PF > 0.9 and 0-10V dimming function
  • Has uniform and soft luminance and high luminous efficacy as well as saves energy and protects environment
  • The Back Lit Panel's light guided plate has no yellowing problem


Accessories (sold separately)


FRAME-2X2-BLP

Wattage 40W
Voltage 120-347V
Lumens 4400 lmn
Beam Angle 110°
Lifetime 50000 hours
CRI ≥ 80
Dimmable Yes
Rating IC Rated / Indoor use only / for both Dry and Damp locations
Grade of Protection IP 20
Applications Warehouses / Gymnasiums / Industrial spaces, etc.
Colour Temperature 4000K (Natural White) / 5000K (Cool White)
Operating Temperature -20°C ~ +45°C
Warranty 5 years

 

Recessed Installation

  1. Remove the ceiling tile at an appropriate location where the product is to be installed.
    Raise the product above the bar
  2. With power turned OFF at the breaker, connect power to driver based on wiring diagram
  3. Fix the product protection bracket above the T-bar and insert luminaire into the panel
  4. Adjust appropriate orientation and complete the installation


Surface Mount Installation

  1. Fix A1 / A2 / B1 / B2 by screws, making it a complete frame
  2. Then fix A1 / A2 / B2 at the ceiling and screw off B1
  3. Embed part of the luminaire into the ceiling mounting equipment.
    With power turned OFF at the breaker, connect power to driver based on the wiring diagram
  4. Push up luminaire into the frame seamlessly
  5. Screw up B1 with screws and the surface mount installation is complete


The Suspending Installation

  1. Position the expanded screws at one end of the cable on the ceiling.
    Hook the other end of the cable on panel
  2. Connect the screw cap to the expanded nut of the ceiling.
    With power turned OFF at the breaker, connect power to driver based on the wiring diagram to complete the installation
Proud Partners