ODH1-4IAG

4" GU10 35W Max. thermally protected air-tight housing


Description:
  • Wire through junction Box
  • Adjustable hanger bar from 14" to 24"
  • Thermallly protected and is for new construction
  • Meets state of WA energy code ASTM E283 for air tight
  • For residential applications and direct contact with insulation
Lamp Type GU10 35W Max.
Input Voltage 120V AC
Output Voltage 120V AC
Mounting Four-sided
Application Residential
Included Socket
Push-in connectors

Air Tight Installation

  1. Bar Hangers:
    Insert bar hangers into the slots on the plaster frame.
    Position bar hangers so that nail in tabs point away from housing or point down to ceiling.
  2. Fastening Fixture to ceiling:
    Joist type ceilings — extend bar hangers to fit between joists.
    Position fixture temporarily by hammering "nail-in" tabs into joists.
    Then, secure permanently with nails.
    Hangers should be level with bottom of joists.
    Suspended (T-bar) ceilings — extend bar hangers 1" past T-bars.
    Then, rest fixture on T-bars.
    Secure fixture to T-bars with wire.
  3. Electrical Connection:
    Junction box contains two wires:
    a BLACK (live +) and a WHITE (neutral -), which must be spliced to the house current feed wires.
    Make sure to splice WHITE to WHITE and coloured or BLACK to BLACK.
    After splicing has been completed, tuck splices carefully into junction box and replace cover.

 

Grounding
For Romex or 3 wire Bx:

  • Flexible armour cable installations attach supply ground lead (GREEN) to bars copper ground lead OR
  • To ground screw in wiring box mount OR
  • Mounted on plaster frame

Local electrical codes should be consulted to determine acceptable installation:
Conduit Romex or flexible armour cable.

Proud Partners