1. Home
  2. HVAC
  3. INLINE FANS
  4. ODSIN-80

ODSIN-80

80 CFM Universal Series Inline Fan with attachable 6" plastic collar


Description:

  • Holds an ETL evaluation
  • Motor thermally protected
  • Capable of exhausting air quietly and efficiently
  • Ventilating fan should be ceiling or wall mounted
  • Comes with a capacitor start motor which is known for its high efficiency and long lasting reliability

Air Volume (CFM) 80
Noise (sones) 0.3
Fan Watts < 26W
Duct Diameter 6"
Power Rating 120V /60Hz
Housing Size 11-5/16" x 10-1/2" x 7-3/4"
Intake Dimensions 10" x 3-1/4"
Weight 10.4 lb

Mount Housing to Joist or I-Joist

  1. Hold the housing so that it is in contact with the joist
  2. Attach the housing with four (4) screws to the joist through the holes in each mounting flange


Mount with Hanger Bars

  1. Slidee hanger bars have been provided,
    which allow the housing to be positioned accurately anywhere between the framing
  2. The bars span up to 24" and can be used on all types of framing:
    I-joist, standard joist, and truss construction
  3. Slide hanger bars onto housing and adjust as needed to fit between framing
  4. Extend the hanger bars to the width of the framing, holding the ventilator in place
  5. Secure hanger bars to framing using one screw on each end of hanger bar
  6. Select a proper hole and secure the hanger bars together using flange screws


Install Ductwork

  1. Connect the ductwork (not included) to the damper/duct connector,
    and the ductwork to a roof or wall cap (not included)
  2. Using tape (not included), secure all ductwork connections so that they are air tight

Proud Partners