OE-126

4.5W LED pictogram exit sign with 120 minutes emergency duration time


Description:
  • Includes Test button and charge indicator light
  • Has UL-94V-0 flame rating and is fire-retardant
  • Provides Overcharge & over-discharge protection
Wattage 4.5
Voltage 120V AC or 347V AC /60Hz
Material Injection molded thermoplastic ABS housing
Battery 3.6V 900mAh
Emergency Duration Time ≥ 120 min
Conversion Time < 0.2 seconds
Grade of Protection IP 20
Insulation II, Range: 80m²
Operating Temperature 0°C ~ +40°C
Warranty 5 years

Mounting Instruction

  1. Open front cover by blade screwdriver
  2. Knockout appropriate mount screw hole and cable hole,
    mount back plate on the wall after feed building AC supply cable into back plate
  3. For ceiling and side mounting purpose, remove the mounting hole cover on top or side of the unit.
    Then Assemble the canopy on the unit
  4. Attach crossbar to J-Box, set the longer blade of crossbar touching the J-Box
  5. Route the proper wires through mounting hole out of housing
  6. Make electrical connections inside the J-Box
  7. Push excess wire into J-Box, use screws to tighten canopy to crossbar so that canopy is securely fastened and tight against the wall
  8. Attach battery connector to PC board, restore front cover on unit
  9. If pictogram direction assembled not suitable, take out pictogram and change direction or replace pictogram. Then insert into the diffuser

Proud Partners