OT-08D

Maximum 8W class 2 Driver for LED lighting and moving sign applications


Description:

  • Suitable for dry location
  • High efficiency: up to 80%
  • Strong compatibility, flicker-free dimming
  • Constant voltage phase TRIAC dimmable driver
  • Integrated junction box for hard wire installation
  • Fully isolated metal case — cooling by air convection

Input Voltage 100-130V AC
Output Voltage 12V DC
Max. Wattage 8W
Amps 0.65A
Voltage Range 100-130V AC
Dimmable Yes
Grade of Protection IP 20
Frequency Range 47~63Hz
Power Factor 0.6 (Full loading)
Efficiency (Typ.) 80%
AC Current (Max.) 0.17A
Short Circuit Hiccup mode, recover automatically after fault condition is removed
Over Loading ≤ 120%
Operating Temperature -30°C to +45°C
Warranty 5 years
  1. Turn power off at main switch box
  2. Remove lid from transformer box
  3. Remove knock-out from 120V AC side of transformer
  4. Run 120V AC wires into 120V AC side of transformer
  5. Using wire nuts (not included):
    connect black & white wires of power source to black & white wires of 120V AC side of transformer
  6. Repeat step #3 with green ground wire of power source and green ground wire of transformer
  7. Remove knock-out from 12V DC side of transformer box
  8. Insert 12V DC wiring harness into 12V DC side of transformer box and connect to 12V DC plug of transformer
  9. Replace lid of transformer box
  10. After mounting lights in desired area, connect lights to 12V DC side of transformer.
    Use quick connect plugs located on wiring harness when you do this
Proud Partners