OT-15D

Maximum 15W class 2 Driver for LED lighting and moving sign applications


Description:
  • Suitable for dry location
  • High efficiency: up to 80%
  • Strong compatibility, flicker-free dimming
  • Constant voltage phase TRIAC dimmable driver
  • Integrated junction box for hard wire installation
Input Voltage 100-130V AC
Output Voltage 12V DC
Max. Wattage 15W
Amps 1.25A
Voltage Range 108-127V AC
Dimmable Yes
Grade of Protection IP 20
Frequency Range 47~63Hz
Power Factor 0.6 (Full loading)
Efficiency (Typ.) 80%
AC Current (Max.) 0.33A
Short Circuit Hiccup mode, recover automatically after fault condition is removed
Over Loading ≤ 120%
Operating Temperature -25ºC ~ +45ºC
Warranty 5 years

 

  1. Open the cover to the make connections.
    Remove the appropriate knockout for your installation
  2. Unshield the line feed wire 3" and strip wires 3/8"
  3. Install the included strain relief bushing in the appropriate hole, then push the wires through the connector.
    Make connections in the compartment:
    Match the WHITE from the line feed with the WHITE wire from the LED driver.
    Match the BLACK wire from the line feed with the BLACK wire from the LED driver with the included wire connectors.
    Match the copper wire from the line feed with the GREEN wire from the LED driver
  4. Close the cover, then connect the fixture to the output wire where RED wire is (DC+) & BLACK wire is GND

Proud Partners