menu search close
  1. Home
  2. Electrical Supplies
  3. Drivers
  4. Led Drivers
  5. 12 Volt
  6. OT-18-NOND

OT-18-NOND

12V Class 2 Non Dimmable Driver for LED Lighting

Description:
  • Output Constant Voltage
  • High efficiency: up to 80%
  • Protection: short circuit/Over voltage
  • Integrated junction box for hard wire installation
  • Fully isolated steel case - Cooling by air convection
  • Suitable for dry or damp location use
Input Voltage 108-132V AC
Output Voltage 12V DC
Max. Wattage 18W
Rated Current 1.5A
Working Humidity 20~90%RH, non-condensing
Dimmable No
Grade of Protection IP 20
Isolation Resistance I/P-O/P:100M Ω /500VDC/25°C/70% RH
Short Circuit Hiccup mode, recover automatically after fault condition is removed
Over Loading ≤ 120%
Operating Temperature -25°C to +45°C
Warranty 5 years
Case Quantities 20
  1. Turn power off at main switch box
  2. Remove lid from transformer box
  3. Remove knock-out from 120V AC side of transformer
  4. Run 120V AC wires into 120V AC side of transformer
  5. Using wire nuts (not included):
    connect black & white wires of power source to black & white wires of 120V AC side of transformer
  6. Repeat step #3 with green ground wire of power source and green ground wire of transformer
  7. Remove knock-out from 12V DC side of transformer box
  8. Insert 12V DC wiring harness into 12V DC side of transformer box and connect to 12V DC plug of transformer
  9. Replace lid of transformer box
  10. After mounting lights in desired area, connect lights to 12V DC side of transformer.
    Use quick connect plugs located on wiring harness when you do this

Proud Partners