OT-96D

Maximum 96W class 2 Driver for LED lighting and moving sign applications


Description:
  • Output constant voltage
  • AC input: 108-132VAC
  • High efficiency: up to 80%
  • Protection: short circuit/Over voltage
  • Integrated junction box for hard wire installation
  • Fully isolated aluminum case - Cooling by air convection
  • Strong compatibility, flicker-free dimming
  • Suitable for LED lighting and moving sign applications and others
  • Suitable for dry or damp location use
Wattage 96W
Input Output 108-132V AC
Output Voltage 12V DC
Rated Current 4A
Short Current

Hiccup mode,recover automatically affer fault condition is removed

Over Loading

≤120%

Grade of Protection IP 20
Efficiency 80%
Power Factor >0.5
Frequency 60Hz
Dimming Triac Dimming
Operating Temperature -25ºC ~ +45ºC

 

Installation of this transformer MUST comply with local building codes:

  1. Turn power OFF at main switch box
  2. Remove lid from transformer box
  3. Remove knockout from 120V AC side of transformer
  4. Run 120V AC wires into 120V AC side of transformer
  5. Using wire nuts (not included), connect BLACK and WHITE wires of power source to:
    BLACK and WHITE wires of 120V AC side of transformer
  6. Make sure all 120V AC connections are made inside 120V AC side of transformer box
  7. Repeat step3 with GREEN ground wire of power source and GREEN ground wire of tranformer
  8. Remove knockout from 12V DC side of transformer box
  9. Insert 12V DC wiring harness into 12V DC side of transformer box and connect to 12V DC plug of transformer
  10. Replace lid of transformer box
  11. After mounting lights in desired area, connect lights to 12V DC side of transformer.
    Use quick connect plugs located on wiring harness when you do this

Proud Partners