SL-50M

SL-50M

Cuttable and connectable LED strip of 50 meters length, 60 LEDs per meter

Description:

Easy installation
Clip or channel mount
No need for driver and soldering
Saves effort and labour costs on changing lights frequently
Plug and play, one plug cord can run the longest 164ft (50m)

Accessories (sold separately):

Specifications
Installation

Wattage	8-10W per meter
Voltage	120V AC
Lumens	780 lmn per meter
Beam Angle	120°
Lifetime	50000 hours
CRI	80
Dimmable	Yes
Number of LEDs	60 SMDs per meter
Cut Distance	50 cm
Rating	Non-IC Rated / Both indoor and Outdoor use / for Dry, Damp, *Wet locations
Grade of Protection	IP 67
Application	Under cabinet / Home / Office / Garage / Kitchen, etc.
Colour Temperature	3000K (Warm White) / 5000K (Cool White)
Operating Temperature	-30°C ~ +40°C
Warranty	5 years

* SL-50M CANNOT be used under water for long time

LED Strip 2 or 4 Pin Connection

Find the proper pin
Plug the sharp pin into the strip light (The 2 pin must need to insert into the 2 wire place)
Plug another end of pin into the power cord
Connect the strip light to the power cord at full tilt

RGB LED Strip 4 Pin Connection Remark

RGB LED Strip Light has 4 cable inside and the space between each cable is small
Make sure that each cable will not touch together when plug the 4 pins into the LED Strip Light.
Otherwise, will cause short circuit and damage the controller

Cutting

Find the transparent gap between the PCB
Cut the gap according to your required meters, and plug

Waterproof for Outdoor Use

If you want to install it outdoor, put the glue into the end cap and power cord connector, middle connector
This ensures that LED Strip be waterproof

How to Fix LED Strip

Fix the clip on the LED strip
Screw the clip on the wall

Related Products

Proud Partners