4″ LED Slim Recessed Drop Downlight in 12W with durable aluminum body

Available Finishes:
  • White


  • 4″ Round LED drop light with driver in connection box
  • Rated for damp locations where not directly in contact with water or snow
  • IC rated for direct contact with insulation
  • Durable aluminum body
  • Can be installed directly into drywall
  • Class 2 transformer in junction box is included

  • Wattage: 12W
  • Voltage: 120V
  • Lumens: 960 lmn
  • Beam Angle: 24°
  • Lifetime: 50000 hours
  • Cutout: ⌀ 4-19/64" (109 mm)
  • Dimmable: Yes
  • Colour Temperature: 3000K (Warm White) / 5000K (Cool White)
  1. Open the cover of the junction box
  2. Push and remove one of the 1/2" knockouts on the side plate
  3. Install standard L16 cable connector
  4. Use double connector for daisy chaining multiple drivers
  5. Insert line voltage feed into the cable connector and splice same colour wires using wire nuts
  6. Close the cover.
    Connect the driver to the light fixture — the arrows on the male and female parts of the connector — between the driver and the fixture should match
  7. TIghten the connector by hand.
    DO NOT attach the junction box to anything so you can pull it through the ceiling opening in case you need to service the driver in the future
Related Products
Proud Partners