SLIM4DGF-5CCT

4" 5 adjustable CCT round flat durable slim gimbal light


Available Finishes:
  • White
  • Black

Description:
  • Class 2 transformer in junction box is included
  • Tilting gimbal light source for directional lighting
  • No housing required — type IC, air tight & damp location rated
  • Easy & Fast installation — install directly into ceiling with clips

 

Accessories (sold separately):

PLATE4-HB PLATE26-4 CORD-12/24/60/120/240
Mounting plate for ORTECH 4" slim lights New construction plate for ORTECH 4" slim lights Flexible Connector 2FT/5FT/10FT/20FT

 

Wattage 12W
Voltage 120V AC
Lumens 900 lmn
Beam Angle 38°
Lifetime 50000 hours
Cutout Ø 4-1/4" (108 mm)
CRI 80
Dimmable Yes
Rating IC Rated / Indoor use / for Damp location
Grade of Protection IP 44
Air Tight Yes
Application Recessed ceiling / Halls / Home / Office / Store / Cafe
Colour Temperature 2700K / 3000K / 3500K / 4000K / 5000K
Operating Temperature -20°C ~ +40°C
Warranty 5 years
Case Quantities 18

Driver Wiring

  1. Open the hardwire box swing cover.
    Remove the appropriate knockout(s)
  2. Insert the electrical supply cable through the knockout.
    Secure with a cable connector (sold separately)
  3. Using wire nuts, connect GREEN ground wire of cable to GREEN wire on box.
    Connect WHITE wire of cable to WHITE wire of box.
    Connect BLACK wire of cable to BLACK wire of box
  4. Place all wiring and connections back into the box and close the cover
  5. Insert hardwire box through the mounting hole

 

Fixture Installation

  1. Connect the fixture to the hardwire box by inserting and twisting the male / female connectors
  2. Select desired colour temperature using the selector button at the back of the fixture
    (preset to 3000K — wawrm white)
  3. Push spring loaded clips on the fixture upwards and insert fixture base into the mounting hole.
    Release the clips and fixture will be pulled flush to the ceiling
  4. Once assembly is complete, turn ON power to confirm that fixture is working properly

Proud Partners