1. Home
  2. LED
  3. Slim lights
  4. 4 INCH
  5. Light
  6. SLIM4GIM-5CCT

SLIM4GIM-5CCT

4" 5 adjustable CCT gimbal downlight with 30º tilt


Available Finishes:
  • White
  • Black

Description:

  • Class 2 transformer in junction box is included
  • Easy & fast installation — install directly into ceiling with clips
  • No housing required — Type IC, air tight & damp location rated
  • High brightness, low power consumption, energy efficient (up to 80% energy savings)

 

Accessories (sold separately):

PLATE4-HB PLATE26-4 DMD-ELV
Mounting plate for ORTECH 4" slim lights New construction plate for ORTECH 4" slim lights Single-pole 3 way dimmer

 

Wattage 9W
Voltage 120V AC
Lumens 700 lmn
Beam Angle 38º
Lifetime 50000 hours
Cutout Ø 4-1/8" (105 mm)
CRI 80
Dimmable Yes
Rating IC Rated / Indoor use / for Damp location
Grade of Protection IP 44
Air Tight Yes
Application Recessed ceiling / Halls / Home / Office / Store / Cafe
Colour Temperature 2700K / 3000K / 3500K / 4000K / 5000K
Operating Temperature -20ºC ~ +40ºC
Warranty 5 years

Driver Wiring

  1. Open the hardwire box swing cover and remove the appropriate knockout(s)
  2. Insert the electrical supply cable through the knockout and secure with a cable connector (sold separately)
  3. Using wire nuts, connect GREEN ground wire of cable to GREEN wire on box.
    Connect WHITE wire of cable to WHITE wire of box.
    Connect BLACK wire of cable to BLACK wire of box
  4. Place all wiring and connections back into the box and close the cover
  5. Insert hardwire box through the mounting hole

 

Fixture Installation

  1. Conenct the fixture to the hardwire box by inserting and twisting the male/female connectors
  2. Push spring loaded clips on the fixture upwards and insert fixture base into the mounting hole.
    Release the clips and fixture will be pulled flush to the ceiling
  3. Once assembly is complete, turn ON power to confirm that fixture is working properly
Proud Partners