6” Fire Rated Floating Gimbal Recessed LED - with Adjustable CCT


  • Reinforced and heat resistant steel casting providing 2-hour fire rating 
  • Junction box with commercial grade driver included
  • Easy installation (no additional box required)
  • 5-color field selectable CCT - 2700K, 3000K, 3500K, 4000K, 5000K
  • Tested & Certified to comply with UL 263-2011(R2022) & ASTM E119-20 & CAN/ULC-S101-14
  • Rated for ceiling assemblies with up to 2 layers of drywall, each 5/8 inch, for a total of 1-1/4 inches

Accessories (sold separately):


Wattage 15W
Voltage 120V AC
Lumens 1000 lmn
Beam Angle 120°
Lifetime 50000 hours
CRI 80
Dimmable Yes
Location Damp location
Grade of Protection IP44
Air Tight Yes
Application Recessed ceiling / Balcony / Overhanging eaves
Colour Temperature 2700K / 3000K / 3500K / 4000K / 5000K
Operating Temperature -20°C ~ +40°C
Warranty 5 years

STEP 1: Open the hardwire box swing cover and remove the appropriate knockout(s).

STEP 2: Insert the electrical supply cable through the knockout and secure with a cable connector (sold separately).

STEP 3: Using wire nuts, connect green ground wire of cable to green wire on box. Connect white wire of cable to white wire of box. Connect black wire of cable to black wire of box (Fig. 1)

STEP 4: Place all wiring and connections back in to the box and close the cover.

STEP 5: Insert hardwire box through the mounting hole. (Fig. 2) [Junction box suitable for maximum of 5 No 12 AWG or 8 No 14 AWG conductors]

STEP 1: Connect the fixture to the hardwire box by inserting and twsiting the male/female connectors. (Fig. 3)

STEP 2: Push spring loaded clips on the fixture upwards and insert fixture base in to the mounting hole. Release the clips and fixture will be pulled flush to the ceiling. (Fig. 4)

STEP 3: Once assembly is complete, turn on power to confirm fixture is working properly.

Proud Partners