COB LED flexible strip light of 25m length, 480 LEDs per meter


  • Illuminates under cabinet
  • Easy to install and maintain
  • Energy saving and environment-friendly
  • Extremely luminous with wide viewing angle
  • For general low level lighting in cars, boats, caravans
  • 3M brand adhesive backing enables easy fitting anywhere



Accessories (sold separately):


Wattage 5W per meter
Voltage 12V DC
Lumens 480 lmn
Beam Angle 180°
Lifetime 50000 hours
CRI > 90
Dimmable Yes
Number of LEDs 480 LEDs per meter
Cut Distance 12 LEDs — 25 mm
Rating Non-IC Rated / Indoor use / for Dry location
Grade of Protection IP 20
Application Under cabinet lighting / Display lighting / Mood lighting
Colour Temperature 3000K (Warm White) / 5000K (Cool White)
Operating Temperature -25°C ~ +65°C
Warranty 5 years


  1. Soldering connection should only be performed on designated solder pads (marked "+/-").
    During soldering, DO NOT exceed the maximum soldering time of 10 seconds and the maximum soldering temperature is of +260°C
  2. The smallest unit (25mm 12V DC) can be removed by cutting with scissors between designated solder pads
  3. The mounting of the ribbon is facilitated by means of the double-sided adhesive on the back-surface of the ribbon.
    Care MUST be taken to provide a clean and dry mounting surface, free of oils or silicone coatings as well as dirt partied.
    Take care to completely remove the adhesive backing.
    Once the ribbon is appropriately positioned, press on the ribbon with about 20N/cm²
    (refer to the application techniques of 3M adhesive transfer tapes)
  4. The minimum bending radius is 2cm.
    The ribbon may be bent over a smaller radius of the circuit board containing no electronic components and such bends should be made once and fixed in position to avoid cyclic fatigue

Proud Partners