15a single pole decorative switch

Available Finishes:
  • White
  • Black


  • With two grounding screws

Voltage 120V AC
Amps 15A
Base / Cover Polycarbonate
Power Contacts Silver-nickel alloy
Terminal Screws Plated steel
Frame Polycarbonate
Flammability UL 94V-2
Operating Temperature -40ºC ~ +65ºC
  1. Side Wire:
    Remove insulation approximately 3/4" (1.9cm).
    Connect wires as follows: Loop wire clockwise 3/4 turn around terminal screws.
    Firmly tighten screws over wire loops.
  2. To Back Wire:
    Remove insulation per strip gauge on device approximately 1/2" (1.3cm).
    Insert wires into holes next to approximate terminal screws. tighten screws firmly.
  3. Mount device using long mounting screws. Attach wall plate.
  4. Restore power at circuit breaker or fuse. Installation complete.

Proud Partners