DISC4-3CCT

Round 4" 3 adjustable CCT LED slim light with driver in connection box


Available Finishes:
  • White

Description:

  • Class 2 transformer in junction box is included
  • Easy & fast installation — install directly into ceiling with clips
  • No housing required — Type IC, air tight & damp location rated

 

Trims (sold separately):

SLIM4-RING BR SLIM4-RING CH SLIM4-RING CP SLIM4-RING BK SLIM4-RING SN
Brown ring Chrome ring Copper ring Black ring Satin Nickel ring

 

 

Accessories (sold separately):

PLATE4-HB PLATE26-4 DMD-ELV
Mounting plate for ORTECH 4" slim lights New construction plate for ORTECH 4" slim lights Single-pole 3 way dimmer

 

Wattage 12W
Voltage 120V AC
Lumens 900 lmn
Beam Angle 120°
Lifetime 50000 hours
Cutout Ø 4-1/4" (108 mm)
CRI 80
Dimmable Yes
Rating IC Rated / Indoor use / for Damp location
Grade of Protection IP 42
Air Tight Yes
Application Recessed ceiling / Balcony / Overhanging eaves
Colour Temperature 3000K (Warm White) / 4000K (Cool White) / 5000K (Cool White)
Operating Temperature -20°C ~ +40°C
Warranty 5 years

Driver Wiring

  1. Open the hardwire box swing cover and remove the appropriate knockout(s)
  2. Insert the electrical supply cable through the knockout and secure with a cable connector (sold separately)
  3. Using wire nut, connect GREEN ground wire of cable to GREEN wire on box.
    Connect WHITE wire of cable to WHITE wire of box.
    Connect BLACK wire of cable to BLACK wire of box
  4. Place all wiring and connections back into the box and close the cover
  5. Insert hardwire box through the mounting hole

 

Fixture Installation

  1. Connect the fixture to the hardwire box by inserting and twisting the male / female connectors
  2. Push spring loaded clips on the fixture upwards and insert fixture base in the mounting hole.
    Release the clips and fixture will be pulled flush to the ceiling
  3. Once assembly is complete, turn on power to confirm fixture is working properly
Proud Partners