CCT & Wattage Selectable LED Mini Wall Pack with Integrated Photocell Sensor
Wattage | 15W / 20W / 25W |
Voltage | AC100-277V |
Dimmable | Yes(only 0-10v dimming available) |
Rate Current | 0.28A |
Lifetime | 50000 hours |
Lumens | >125lm/W |
CRI | >80 |
Location | Wet location |
Beam Angle | 90°x140° |
Colour Temp. | 3000K (Warm White) / 4000K (Natural White) / 5000K (Cool White) |
Operating Temperature | -40°C~45°C |
Materials | Mounting | ADC12 | Bracket Fixed |
Warranty | 5 years |
1. Disassemble the fixing screws of the lamp mounting plate with a screwdriver and remove the mounting plate.
2. After knocking out the mounting holes with a hammer (at least 2 mounting holes and they should be in a symmetrical position), press the bracket on the wall with your hand and mark with the pen at the mounting screw position.
3. Use the electric drill to punch the hole at the mark position Ø8mm, depth 40mm; and use a hammer to drive the plastic expansion tube into the hole.
4. Fix the bracket with a screwdriver, and fix the fixture installation wire rope on the mounting plate, connect the cable as shown and do a good waterproof treatment.
5. Put the lamp back on the mounting plate and secure the screws to complete the installation.