These step lights are designed for safety. It lights your walkways, stairways, and decks, clearly guiding the steps.


Differs from traditional step lights, these step lights are made for surface mounted, without junction box behind. No recessed mounting accessories requried, it helps for quick and easy installations. Full-cut off cover casts a comfortable glow without glare.

  • 2W LED integrated design with 9-15V AC input voltage
  • Mid grade aluminum construction
  • No visible screws in surface
  • Full cut-off cover casts a comfortable, soft warm glow without glare
  • Suitable for wet location
  • Surface mounted , without junction box, no recessed mounting required

Material Aluminum
Input Voltage 9-15V AC
Wattage 2W
Light Source Integrated LED Chips
Color Temperature 2700K
Lumen 20lm
CRI 80
Wiring 3'SPT-1W
Lens Frosted Lens
Operating Temperatures -20°C ~ +40°C


Luminaire Mounting

  1. To prevent electric shock, disconnect transformer from electrical supply before installation service
  2. Drill hole through post or flat mounting surface to feed lead wire through
  3. Position fixture against mounting surface and mark surface through both screw slots
  4. While luminaire is positioned in place, install mounting screws through the luminaire screw slots, securing luminaire to the post / flat mounting surface
  5. Strip the (2) leads from the luminaire pigtail wire.
    Using the two (2) silicone filled safety connectors (by others), connect the leads from the luminaire to the main supply cable leads
  6. Replace luminaire cover and twist to secure in place.
Proud Partners