6” Dual Selectable Round Commercial Downlights
| Wattage | 7W/10W/18W |
| Voltage | 120-347V AC, 50/60Hz |
| Lumens | 650lm/950lm/1600lm |
| Beam Angle | 120º |
| Lifetime | 50000 hours |
| CRI | 80+ |
| Dimmable | Yes(only 0-10v dimming available) |
| Location | For indoor use |
| Grade of Protection | IP54 |
| Colour Temperature | 2700K / 3000K / 3500K / 4000K / 5000K |
| Application | New construction /Retrofit, etc. |
| Operating Temperature | -20ºC ~ +40ºC |
STEP 1: Remove LED downlight fixture from the packaging.
STEP 2: Make sure the POWER IS TURNED OFF at the source of the recessed housing(s) that you are installing the fixture in. Once power has been turned off, remove existing trim and lamp holder, revealing the existing socket and split up the terminals.
STEP 3: Put the lamp holder into the socket and twist socket clockwise until locked.
STEP 4: Pull LED downlight assembly, connect the terminals between the lamp holde and the trim. Care should be taken not to damage the wires during this process.
STEP 5: Slide LED downlight with torsion spring in fully-deployed position.STEP 6: Push up intp the recessed housing until trim ring is flush with ceiling.
