OD-MC609V RC D

120-347V waterproof indoor use sensor for vapour tights, high bays and LED panels

Mounting height is maximum 15m
Has patented microwave antenna
Functions with remote controller MH01, and is easy to adjust sensor parameters
Works with 1-10V dimmable LED driver and easy to achieve 2-step or 3-step dimming function

Wattage	0.5W Max. (transmitting power) < 1.5W (stand-by power)
DC Input Voltage	N/A
Rated Voltage	120V AC / 277V AC / 347V AC, 50/60Hz
Working Mode Output	On/OFF function, 1-10V step dimming
Dim Interface	< 50mA (non-constant source) 10% (1.4-1.6V) / 20% (1.9-2.1V) / 30% (2.9-3.1V) / 50% (4.9-5.1V)
Operating Frequency	5.8 GHz ± 75MHz, ISM Band
Lifetime	50000 hours
Grade of Protection	IP 65
Protection Class	Class II
Environment Requirement	Compliant to RoHS
Wiring	Input STW, 318AWG exposed line length: 810-830 mm 1-10V DC: STJW, 218AWG exposed line length: 810-830 mm
Detection Angle	150° (wall mounting) 360° (ceiling mounting)
Hold Time	DIP switch: 5s / 30s / 1min / 3min / 20min / 30min Remote control: 5s / 30s / 1min / 3min / 5min / 10min / 20min / 30min
Stand-by Dim Level	DIP switch & Remote control: 10% / 20% / 30% / 50%
Stand-by Period	DIP switch: 0s / 1min / 3min / 10min / 30min and so forth Remote control: 0s / 10s / 1min / 3min / 5min / 10min / 30min and so forth
Detection Area	DIP switch: 100% / 50% Remote control: 25% / 50% / 75% / 100%
Daylight Sensor	DIP switch & Remote control: 5lux / 15lux / 30lux / 50lux / 100lux / 150lux / Disable (ambient light diffusion)
Detection Radius	5-8m (mounting height 8m, maximum mounting height 15m)
Operating Temperature	-35°C ~ +55°C

Initialization

ON/OFF function / 3-step dimming function:
After power ON, the sensor automatically turns on light at 100% brightness.
After 10sec, it turns off the light. During the initialization, the sensor is not able to detect movement
2-step dimming function:
After power ON, the sensor automatically turns on light at 100% brightness.
After 10sec, it dims the light to a low light level (set by stand-by dim level).
During the initialization, the sensor is not able to detect movement

Factory Setting

Proud Partners