menu search close
  1. Home
  2. LED
  3. COMMERCIAL LIGHTING
  4. Area Lights
  5. OD-SB4-150W

OD-SB4-150W

Commercial grade LED Shoe Boxes available in 150W with socket base

Description:
  • Photocell Control available (Optional)
  • Cast aluminum design for better cooling and easy replacement
  • Excellent optical design that greatly improves the light utilization and evenness
  • High Efficiency LED Driver with wide range input voltage ranging from 100 to 347V AC


 

Accessories (sold separately):

Wattage 150W
Voltage 100-347V AC
Lumens 19500 lmn
Beam Angle Type III-M
Lifetime 50000 hours
CRI > 70
Dimmable Yes(only 0-10v dimming available)
Rating Non-IC Rated / Both Indoor and Outdoor use / for Wet location
Grade of Protection IP 65
Application Warehouses / Gymnasiums / Industrial spaces, etc.
Colour Temperature 5000K (Cool White)
Operating Temperature -40°C ~ +40°C
Warranty 5 years

Type A (Slip-fitter)

  1. Loosen the 4 screws on the lamp holder
  2. Connect the wires correctly and put the wires into the lamp pole
  3. Lock the screws well to fix the lamp on the lamp pole
  4. Loosen the locking bolt with tools
  5. Rotate the lamp and lock the screw after determining the required angle
  6. Locking bolt can be only compatible with a lamp pole that the outer diameter is ⌀ 60, lamp adjustable angle is 0-90°


Type B (Square / Round pole mount with slip-fitter function)

  1. Use tools to take screw apart and put installed iron bar away
  2. Remove fixed screw
  3. Open junction box, then pass the AC wire through it
  4. Use tools to fix the lamp on square lamp pole
  5. Connect the wires correctly
  6. Make waterproof measures well
  7. Close the junction box and finish installation
    * Remove the rubber mat when the lamp is installed on round lamp pole
    * Lamp adjustable angle is 0-30°


(For more details of installation guide from Type C to E, refer to the below downloadable link for Instruction Manual PDF)

Proud Partners