Air-tight Installation

1. Hanger Bars:
   Insert hanger bars into the slots on the plaster frame.
   Position hanger bars so that nail in tabs point away from housing or point down to ceiling
2. Fastening Fixture to Ceiling:
   Joist-type ceilings — Extend bar hangers to fit between joists.
   Position fixture temporarily by hammering "nail-in" tabs into joists then secure permanently with nails.
   Hangers should be level with bottom of joists.
   Suspended (T-bar) Ceilings — Extend bar hangers 1" past T-bars then rest fixture on T-bars.
   Secure fixture to T-bars with wire
3. Electrical Connection:
   Junction box contains two wires:
   Black (live +) and a white (neutral -) which must be spliced to the house current feed wires.
   Make sure to splice WHITE to WHITE and coloured or BLACK to BLACK.
   After splicing has been completed, tuck splices carefully into junction box and replace cover

Grounding

• For Romex or 3 wire Bx, flexible Armour cable installations
  attach supply ground lead (green) to bars copper ground lead
  or ground screw in wiring box mount or mounted on plaster frame