menu search close
  1. Home
  2. LED
  3. COMMERCIAL LIGHTING
  4. Emergency Lights
  5. OE-212

OE-212

2W (AC) / 2*1.2W (DC) LED dual head emergency light with 120 minutes emergency duration time

Description:

  • Full recharge time is maximum 24 hours
  • Suitable for 0ºC to +40ºC indoor damp locations
  • 2 x 12 pieces ultra bright 2835 SMT LED lamp heads for emergency mode
  • 3.6V 1200mAh Nickel-Cadmium battery for minimum 120 minutes emergency operation

Wattage 2W (AC) / 2*1.2W (DC)
AC Voltage 120-347V AC /60Hz
AC Charging Current 30mA AC
DC Charging Voltage 4.35-4.5V DC
DC Charging Current 90-130mA DC
Lumens 260 lmn
Material Injection-molded thermoplastic ABS housing
Battery 3.6V 1200mAh
Battery Type Nickel-Cadmium Battery
Emergency Duration Time ≥ 120 min
Discharge Current 430-500mA
Charging Time ≤ 24 hours
Colour Temperature 6500K (Cool White)
Operating Temperature 0°C ~ +40°C
Warranty 5 years

 Wall Mount Installation

  1. Press the buttons to take out the backplate from the fixture
  2. Remove knockout on backplate and mount J-Box to backplate
  3. Knockout centre of backplate and feed wires through hole
  4. Secure backplate to J-Box
  5. Connect J-Box wires to power supply wires using the wire nuts provided. Connect the WHITE wire to NEUTRAL:
    If using 120V, connect the BLACK wire to hot lead.
    If using 277V, connect the RED wire to hot lead. Cap unused lead. Place wires into J-Box
  6. Snap front coverr onto backplate
  7. Restore power and press test button. LED heads will turn ON
  8. Adjust lamp heads and lens direction as per your needs


Ceiling Mount Installation

Refer to wall mount installation instruction above:

  1. Mount backplate on ceiling surface
  2. Feed building AC supply wire through backplate
  3. Connect fixture power supply wires using wire nuts provided

Proud Partners