Mounting Instruction

1. Open front cover by blade screwdriver
2. Knockout appropriate mount screw hole and cable hole,
   mount back plate on the wall after feed building AC supply cable into back plate
3. For ceiling and side mounting purpose,
   remove the mounting hole cover on top or side of the unit,
   assemble the canopy on the unit
4. Attach crossbar to junction box, set the longer blade of crossbar touching the J-Box
5. Route the proper wires through mounting hole out of housing
6. Make electrical connections inside the J-Box
7. Push excess wire into J-Box, use screws to tighten canopy to crossbar
   so that canopy is securely fastened and tight against the wall
8. Attach battery connector to PC board, restore front cover on unit
9. If pictogram direction assembled not suitable,
   pictogram can take out for change direction or replace pictogram,
   and then insert into the diffuser easily