OIF10-670

10" duct commercial / residential grade 100% speed controllable inline fan


Description:
  • Complies with CSA C22.2 No.113 standard clause 12 for Dryer Exhaust Duct Power Ventilators
  • High performance external rotor, motor / impeller, and energy efficient and quiet operation
  • Includes permanently lubricated ball bearings that are maintenance free
  • High static pressure applications and easy to install
  • Operating temperature is from -10°C to +80°C
  • Painted cold-rolled steel housing

 

Add Ons (Optional):

Model Current
(Amp)
Power
(Watt)
RPM
(Nominal)
Noise
(Sone)
Electrical
Rating
Room Size
Capacity
OIF10-670 1.88 220 2660 4.4 120V/60Hz 580-680 ft²





 

 

Static Pressure (SP)
0 SP 0.1 SP 0.2 SP 0.25 SP 0.3 SP 0.4 SP 0.5 SP 0.6 SP 0.7 SP 0.8 SP 0.9 SP 1.0 SP 1.2 SP 1.4 SP 1.5 SP 1.6 SP 2.0 SP 2.5 SP
647 CFM 629 CFM 570 CFM 538 CFM 520 CFM 482 CFM 470 CFM 450 CFM 429 CFM 411 CFM 388 CFM 352 CFM 545 CFM 480 CFM 252 CFM 241 CFM 176 CFM 94 CFM

 

Mounting Installation Method
(Fans can be installed vertically or horizontally)

  1. Attach mounting bracket A to the fan on opposite side of the junction box using 2 rubber washers (rectangular washer B) and 2 cross tapping screws (ST4.2x20) provided
  2. Attach mounting bracket B to the fan on the junction box side using the remaining 2 rubber washers and 2 cross tapping screws, this bracket contains an optional sensor switch mounting hole
  3. Mark the holes for the fan's installation screw the 4 pcs of M6X80 screws to the stud where the fan will be mounted
  4. Mount the fan with a rubber washer through the screws
  5. Duct the fan with the duct tape on mounting clamps (sold separately)

Proud Partners