SLIM-RG1-5CCT

1" Regress Module Changeable Trim - with Adjustable CCT

Interchangeable Trims
Type IC, Air-Tight - No Housing Required
Fast Installation & No Junction Box Needed
Includes two spring loaded clips to attached to any ceiling material
100%-10% dimming capability. Compatible with industry standard forward-phase / reverse-phase and Triac/ELV Dimmers
Rated for long life - over 50,000 hours

Interchangeable Trims (sold separately):

Accessories (sold separately):


PLATE26-1	CORD-12/24/60/120/240	DMD-ELV
New mounting plate for ORTECH 1" slim lights	Flexible Connector 2FT/5FT/10FT/20FT	Electronic low voltage dimmer switch with single pole 3 way wiring

Wattage	7W
Voltage	120V AC
Lumens	500 lmn
Beam Angle	38°
Lifetime	50000 hours
CRI	90Ra+
Dimmable	Triac Dimming
Rating	IC Rated / Indoor use / for damp location
Grade of Protection	IP 54
Air Tight	Yes
Applications	Recessed ceiling / Halls / Home / Office / Store / Cafe
Colour Temperature	2700K / 3000K / 3500K / 4000K / 5000K
Operating Temperature	-20°C ~ +40°C
Warranty	5 years

Driver Wiring

Open the hardwire box swing cover.
Remove the appropriate knockout(s)
Insert the electrical supply cable through the knockout.
Secure with a cable connector (sold separately)
Using wire nuts, connect GREEN ground wire of cable to GREEN wire on box.
Connect WHITE wire of cable to WHITE wire of box.
Connect BLACK wire of cable to BLACK wire of box
Place all wiring and connections back into the box and close the cover
Insert hardwire box through the mounting hole

Fixture Installation

Connect light engine. Be sure to properly align connectors.
Fully screw down connector cover
Connect the fixture to the hardwire box by inserting and twisting the male / female connectors
Push spring loaded clips on the fixture upwards.
Insert fixture base into the mounting hole.
Release the clips and fixture will be pulled flush to the ceiling
Once assembly is complete, turn ON power to confirm that fixture is working properly

Proud Partners