4" LED slim contractor pack (6 pieces in one box) with 3 options of colour temperature


  • Class 2 transformer in junction box is included
  • Rated for damp location where not directly exposed to water
  • Easy and fast installation — install directly into ceiling with clips
  • IC rated for direct contact with insulation, recessed housing not required


Decorative Trim Rings (sold separately):

Black ring Satin Nickel ring Chrome ring Brown ring Copper Nickel ring

Accessories (sold separately):

Mounting plate for ORTECH 4" slim lights New construction plate for ORTECH 4" slim lights Flexible Connector 2FT/5FT/10FT/20FT


Wattage 12W
Voltage 120V AC
Lumens 900 lmn
Beam Angle 120º
Lifetime 50000 hours
Cutout 4-1/4" (108 mm)
CRI 80
Dimmable Yes
Rating IC Rated / Indoor use / for Damp location
Grade of Protection IP 44
Air Tight Yes
Application Recessed ceiling / Balcony / Overhanging eaves
Colour Temp. 3000K (Warm White) / 4000K (Natural White) / 5000K (Cool White)
Operating Temp. -20ºC ~ +40ºC
Warranty 5 years

Driver Wiring

  1. Open the hardwire box swing cover.
    Remove the appropriate knockout(s)
  2. Insert the electrical supply cable through the knockout.
    Secure with a cable connector (sold separately)
  3. Using wire nut, connect gren ground wire of cable to green wire on box.
    Connect white wire of cable to white wire of box.
    Connect black wire of cable to black wire of box
  4. Place all wiring and connections back into the box and close the cover
  5. Insert hardwire box through the mounting hole.


Fixture Installation

  1. Connect the fixture to the hardwire box by inserting and twisting the male/female connectors
  2. Push spring loaded clips on the fixture upwards and insert fixture base in the mounting hole.
    Release the clips and fixture will be pulled flush to the ceiling
  3. Once assembly is complete, turn on power to confirm fixture is working properly

Proud Partners