OE-316-WET

LED Running Man Combo Exit Sign

Made of UV stabilized polycarbonate with 120 minutes backup time and adjustable heads
LED Exit Signs with innovative, snap-together design, which allow for fast and easy installation
Single and double face universal configuration available
Injection-molded polycarbonate housing with wall and end mounting
Has UL-94V-5VA flame rating and is fire-retardant
Suited for wet location application
Includes Test button and charge indicator light
Provides Overcharge & over-discharge protection
CSA listed meets all requirement in C22.2 No. 141-15,C860 and UL924

Wattage	4W (1.15W per head)
Voltage	AC 120-347 / 60Hz
Lumens	260lm (130lm per head)
Material	Injection molded PC enclosure and ABS housing
Battery	3.6V 1500mAh (2pcs)
Emergency Duration Time	≥ 120 min
Conversion Time	< 0.2 seconds
Grade of Protection	IP65
Insulation	II
Operating Temperature	0°C ~ +50°C
Warranty	3 years
Application	Offices / Malls / Hotels / Restaurants / Schools / Hospitals / Airports / Train Stations / Cinemas / Warehouses
Case Quantities	6

Mounting Instruction

Open front cover and assemble 2 pcs lamp heads on the frame
Knockout appropriate mount screw hole and cable hole, mount back plate on the wall after feeding building AC supply cable into black plate
For ceiling and side mounting purpose, remove the mounting hole cover on the top or side of the unit, assemble the canopy
Attach crossbar to junction box, set the longer blade of crossbar touching the J-Box
Route the proper wires through mounting hole out of housing
Make electrical connections inside the J-Box
Push excess wire into J-Box, use screws to tighten canopy to crossbar so that the canopy is securely fastened and tight against the wall
Attach battery connector to PC board, restore front cover on unit, adjust position of lamp heads as needed
If pictogram direction is assembled not suitable, change pictogram direction or replace pictogram, and then insert into diffuser

Proud Partners