4" LED Retrofit Recessed Light - with Adjustable CCT
Accessories (sold separately):
Wattage | 10W |
Voltage | AC120V, 60Hz |
Lumens | 800 lmn |
Beam Angle | 120° |
Lifetime | 50000 hours |
CRI | 80 |
Dimmable | Yes |
Rating | IC Rated / Indoor use / for Wet location |
Grade of Protection | IP 54 |
Air Tight | Yes |
Application | Recessed ceiling / Balcony / Overhanging eaves |
Colour Temperature | 2700K / 3000K / 3500K / 4000K / 5000K |
Operating Temperature | -20°C ~ +40°C |
Warranty | 5 years |
STEP 1: Remove LED downlight fixture from the packaging.
STEP 2: Make sure the POWER IS TURNED OFF at the source of the recessed housing(s) that you are installing the fixture in. Once power has been turned off, remove existing trim and lamp holder, revealing the existing socket and split up the terminals.
STEP 3: Put the lamp holder into the socket and twist socket clockwise until locked.
STEP 4: Pull LED downlight assembly, connect the terminals between the lamp holde and the trim. Care should be taken not to damage the wires during this process.
STEP 5: Slide LED downlight with torsion spring in fully-deployed position.
STEP 6: Push up intp the recessed housing until trim ring is flush with ceiling.