OLT2-412-WH

4" LED economical retrofit slim recessed light in 12W with durable aluminum construction

Retrofitting existing recessed can light housing as well as new construction
Contains stainless steel flexible spring, quick connector and E26 base adaptor
Ready to fit recessed housing cans directly, no additional accessories are required
Ideal for hotel, cans bathroom, kitchen, office, workplaces, cafe or other architectural lighting
Baffled ridges trap & shape the light downward creating a glare-free & uniform lighting effect

Accessories (sold separately):


PLATE4-HB	PLATE26-4	CORD-24/60/120/240	DMD-ELV
Mounting plate for ORTECH 4" slim lights	New construction plate for ORTECH 4" slim lights	Flexible Connector 2FT/5FT/10FT/20FT	Electronic low voltage dimmer switch with single pole 3 way wiring

Wattage	12W
Voltage	120V AC
Lumens	700 lmn
Beam Angle	120°
Lifetime	50000 hours
Cutout	No need to open hole in the ceiling; item mounted into 4″ IC housing directly
CRI	80
Dimmable	Yes
Rating	Non-IC Rated / Indoor use / for Damp locations
Grade of Protection	IP 44
Air Tight	Yes
Application	Hotels / Cans bathrooms / Kitchen / Office / Workplace / Cafe
Colour Temperature	3000K (Warm White) / 5000K (Cool White)
Operating Temperature	-20ºC ~ +40ºC
Warranty	5 years
Case Quantities	20

Remove LED Down light fixture from the packaging
Make sure the POWER IS TURNED OFF at the source of the recessed housing(s) that you are installing the fixture in.
Once power has been turned off, remove existing trim and lamp holder, revealing the existing socket and split up the terminals
Put the lamp holder into the socket and twist socket clockwise until locked
Pull LED downlight assembly, connect the terminals between the lamp holder and the trim.
Care should be taken not to damage wires during this process
Slide LED downlight with torsion spring in fully-deployed position
Push up into the recessed housing until trim ring is flush with ceiling

Proud Partners