menu search close
  1. Home
  2. LED
  3. RESIDENTIAL LIGHTING
  4. Strip Lights
  5. Lights
  6. SL-RGB5LO

SL-RGB5LO

LED Low Voltage RGB Strip of 5 meters length, 60 LEDs per meter

Description:
  • Has 20 colours, 4 levels of brightness, 4 modes
  • Can be used creatively for interior decorative lighting
  • Produces little heat, which makes the strip safe to touch
  • Mounted with 3m tape backing that adheres to any surface
  • IP 65 — could be exposed to humidity and occasional splashing

 

 

Included:

  • 5m LED tape light
  • Plug-in driver (power supply)
  • Colour changing controller with IR sensor
  • Remote

 

Wattage 12W per meter
Voltage 12V DC
Lumens N/A
Beam Angle 120°
Lifetime 30000 hours
CRI N/A
Dimmable Yes
Number of LEDs 60 LEDs per meter
Cut Distance 3 LEDs — 5cm
Colours RGB / Multicolour
Rating Non-IC Rated / Both Indoor and Outdoor use / for Wet location
Grade of Protection IP 65
Application Living room / Recreation room / Bar / Club / Garden / Porches and patio areas
Operating Temperature -20°C ~ +45°C
Warranty 5 years

 

  1. Ensure the mounting surface is clean and free of dust, grease or flaking materrial
  2. Peel back the protective film away from the strip exposing the glue.
    Apply to the mounting surface in the required location
  3. When the desired length has been mounted, cut the length ata the designated cutting line
  4. Connect the LED strip cable to the controller
  5. Connect the supply cable to the driver via a suitable terminal block
  6. Make sure that the LED RGB strip does not exceed that of the driver
  7. Switch on the power supply for testing and adjustment
  8. Overr the tailing end of the LED strip light, fit an end cap

Proud Partners