WP-40W 4000K

Commercial / Residential grade LED Traditional Wall Pack in 40W

With glass cover
Made of ADC12 (recycled alloy)
Brown lamp shell and bracket fixed mounting
Internal level ensures that the installation is horizontal
Waterproof breathable technology to maintain stable atmospheric pressure
Dustproof — the wall pack is sealed by silicon ring that can avoid dust completely

Wattage	40W
Voltage	100-347V
Lumens	5200 lmn
Beam Angle	90° x 100° — different direction has different beam angle
Lifetime	50000 hours
CRI	> 80
Dimmable	Yes(only 0-10v dimming available)
Rating	Non-IC Rated / Both Indoor and Outdoor use / for Wet, Dry, Damp locations
Grade of Protection	IP 65
Applications	Warehouses / Gymnasiums / Industrial spaces, etc.
Colour Temperature	4000K (Natural White)
Operating Temperature	-40°C ~ +45°C
Warranty	5 years

Get the screw on the fixture loosened by using the hexagon wrench.
Do not make it off from the fixture completely.
Then take off the mounting plate on the fixture
Pass the AC cables through the large center hole on the mounting plate.
Connect the holes on the mounting plate to the holes in the terminal block.
Depending on the size of the holes in the junction box, use two #8 screws to attach the mounting plate to the junction box.
Use the leveling bubbles in the mounting plate to adjust the horizontal mounting plate
Hang the wire rope onto the mounting plate.
Then use the threaded terminal to connect L/N/Ground wire, dim+/dim- (If not, please ignore) separately.
After that, plug the threaded terminals into the embedded junction box
Hang the lamp on the mounting plate
Tighten the screws on the fixing device with a hexagon wrench
Fill the top and sides of the lamp with waterproof silicone

Proud Partners