Assembly Instructions

1. Remove the wire panel.
   Insert the light wire into wire panel.
   Connect electrical wiring
2. Insert the plug from the control box.
   Insert LED light grille assembly into the suitable wire panel
3. Install grille assembly to the fan

Installation with LED Grille & Fire Damper

1. Remove the damper from the flange
2. Open the quick connect seat.
   Place the LED extension cable in the cut out seat.
   Optionally, open the lower port to fish out the cables.
   Reconnect the seat and bottom part
3. Connect the fan to the quick connect.
   Slide on the flange.
   Connect LED quick connect to new quick connect port
4. Slide the damper flange into the fan.
   Re-attach the fire damper to the damper flange.
   Make sure the LED wire is behind the u-tab to reduce risk of pinching.
   Secure the flange & fire damper together using the 4 screws
5. Using the two mounting clips, connect the LED grille to the damper