OIF12-880

12" duct commercial / residential grade 100% speed controllable inline fan

Complies with CSA C22.2 No.113 standard clause 12 for Dryer Exhaust Duct Power Ventilators
High performance external rotor, motor / impeller, and energy efficient and quiet operation
Includes permanently lubricated ball bearings that are maintenance free
High static pressure applications and easy to install
Operating temperature is from -10°C to +80°C
Painted cold-rolled steel housing

Add Ons (Optional):

Model	Current (Amp)	Power (Watt)	RPM (Nominal)	Noise (Sone)	Electrical Rating	Room Size Capacity
OIF12-880	1.80	210	2730	5	120V/60Hz	680-780 ft²

Static Pressure
0 SP	0.1 SP	0.2 SP	0.25 SP	0.3 SP	0.4 SP	0.5 SP	0.6 SP	0.7 SP	0.8 SP	0.9 SP	1.0 SP	1.2 SP	1.4 SP	1.5 SP	1.6 SP	2.0 SP	2.5 SP
911 CFM	882 CFM	870 CFM	832 CFM	794 CFM	735 CFM	676 CFM	641 CFM	594 CFM	547 CFM	488 CFM	417 CFM	615 CFM	520 CFM	282 CFM	261 CFM	176 CFM	47 CFM

Mounting Installation Method
(Fans can be installed vertically or horizontally)

Attach mounting bracket A to the fan on opposite side of the junction box using 2 rubber washers (rectangular washer B) and 2 cross tapping screws (ST4.2x20) provided
Attach mounting bracket B to the fan on the junction box side using the remaining 2 rubber washers and 2 cross tapping screws, this bracket contains an optional sensor switch mounting hole
Mark the holes for the fan's installation screw the 4 pcs of M6X80 screws to the stud where the fan will be mounted
Mount the fan with a rubber washer through the screws
Duct the fan with the duct tape on mounting clamps (sold separately)

Proud Partners